SwOS/RouterOS operacion de los dos tipos de sistemas operativos de Mikrotik, Switch Gigabit Ethernet de 24 puertos con dos puertos SFP+, conectividad de velocidad de cable con varias características de conmutación nuevas.
Tiene la función de 'arranque dual' que le permite elegir qué sistema operativo prefiere usar, RouterOS o SwOS. Si prefiere tener un solo sistema operativo simplificado con más características específicas de interruptor, use SwOS. Si está acostumbrado a Winbox y le gustaría poder utilizar el enrutamiento y otras características de Capa 3 en algunos puertos de su CRS, inicie y use RouterOS. Puede seleccionar el sistema operativo deseado desde RouterOS, desde SwOS o desde la configuración del cargador RouterBOOT.
Le brinda todas las funciones básicas para un conmutador administrado, y más: permite administrar el reenvío de puerto a puerto, aplicar filtro MAC, configurar VLAN, duplicar el tráfico, aplicar limitación de ancho de banda e incluso ajustar algunos campos de encabezado MAC e IP. La caja SFP admite módulos de 1.25 Gb SFP y 10 Gb SFP+.
Specifications
| Details |
| Product code |
CRS326-24G-2S+RM |
| Architecture |
ARM 32bit |
| CPU |
98DX3236A1-BTD4C000 |
| CPU core count |
1 |
| CPU nominal frequency |
800 MHz |
| Dimensions |
440 x 144 x 44 mm |
| License level |
5 |
| Operating System |
RouterOS / SwitchOS |
| Size of RAM |
512 MB |
| Storage size |
16 MB |
| Storage type |
FLASH |
| Tested ambient temperature |
-40°C .. +60°C |
Powering
| Details |
| Max Power consumption |
24W |
| PoE in |
Passive PoE |
| PoE in input Voltage |
10-30 V |
| Number of DC inputs |
2 (DC jack, PoE-IN) |
| DC jack input Voltage |
10-30 V |
Ethernet
| Details |
| 10/100/1000 Ethernet ports |
24 |
Fiber
Peripherals
Switching results
Ethernet test results
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
